The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Text excerpt from page 69 (click to view)
DPS-5.4 DISASSEMBLY DVD MECHANISM-5
Arrangement of the flexible cable for the pickup : Conductive surface
Note: Be sure to move the Pickup Assy-S to the innermost perimeter.
1 Fold the flexible cable inward at the position of
the reference line. 2 Attach the flexible cable of the pickup to the connector.
7 Pass the flexible cable below the hook, and fold it back.
Make sure that the cable does not have any slack
3 Fold the flexible cable of the pickup with
the backing inward.
Reference line
7
2
Backing
3
1
Hook
97mm +/- 2mm
Front Side
Bottom View
8 Fold the flexible cable back at the hook. 4 Pass the flexible cable through the hook not allowing
any slack.
Make sure there is no slack in the cable Reference line Make sure that the cable is loose Hook
8 4
Hook
5 Fold the flexible cable as indicated in the photo. 6 Hook the part folded in Step 1 to the hook. 5 6
