The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
I liked the price plus it had everything i needed to service the tv.
thankyou Tim Hertz
Text excerpt from page 29 (click to view)
DV-SP504 TEST MODE/ CONFIRM FW
1. Confirm Region code 1-1. Press "Dimmer" key and "Pause" key at the same time. 1-2. Press "Pause" key. Display "Region Code " on the FL tube.
MDD1N : USA 1 NTSC MJJ2N : JPN 2 NTSC MUK3N : ASIA 3 NTSC MUP2P : EURO 2 PAL MUT3P : ASIA 3 PAL MUA4P : AUS 4 PAL
2. Test Mode 2-1. Press "Stop" key and "Display" key at the same time with NO DISC condition. 2-2. Display "SYS 06830A" on the FL tube.
(Version number of System MICIN)
2-3. Press "Display" key three (3) times. 2-3. Display "0E-060907A" on the FL tube.
(Version number of Back end MICIN) TV MONITOR Release Version : OE 060702A (HP-1-------) FE BE Version : 10.26 Version : 1508530000 H: Writing of HDCP key OK P: Writing of CPPM key OK 1: Region number
2-4. Press "Display" key two (2) times. Light up all segment of FL tube. 2-5. Press "Standby" bottom to exit the test mode. 3. Initializing 3-1. Press "Stop" key and "Standby" key at same time with No DISC condition. Display "INITIALIZE" on the FL tube. 3-2. And display "COMPLETE" to "STANDBY".